Posts Categorized: Projects

DIY + Projects / Wednesday, 30 Jan 2013

Polka dot your wrapping

This is the simplest DIY of all time. Seriously. I had been looking for some cutesy polka dot wrapping paper for a couple of photoshoots and couldn’t find it so I made it myself. I used this same technique on black paper too for a photoshoot for my paper flowers (see below). This DIY is featured on Brooklyn Bride today. The full instructions are there, but photos are the best description, non? 
One little tip. White stamp pads are kinda hard to find in stores. Order online! Here’s my recommendation over at Amazon. And you can find the paper flowers in my The House That Lars Built Etsy shop.

photos and DIY by me! Contact me if you’d like customized DIYs for your company.

Share on FacebookTweet about this on TwitterPin on Pinterest

collaborations + Design + DIY + flowers + Projects / Tuesday, 29 Jan 2013

On her head Finale & tutorial

We’re at the finale of the One Her Head series, my collaboration with hair wonder, Rubi Jones of She Lets Her Hair Down, and photographer Jessica Peterson. You can see the other two parts here and here. Today I’m going to show you how to assemble the flowers to do your own headpiece. Sadly, I didn’t get photos of how to actually put it on the head, but I’ll try and describe it.
You will need: your choice of flowers, floral tape, wire, flower clippers, wire cutters, bobby pins. I chose monochromatic pink carnations, mostly because it was the only ok flower at Costco. 
Step 1: Bring two flowers together, one below the other.
Step 2: tape it together tightly.


Step 3: Add another flower below the other two and tape.
Step 4-7: Add another and tape. Are you sensing a pattern? It’s basically just flower, tape, flower tape.
Step 8: Use flower clippers to cut it right below the tape.

Step 9: create another one of these to create a full headpiece.
Step 10: With a piece of wire, create a circle shape to fit the head.
Step 11: Tape the flowers to the wire.
Step 12: Attach the piece to the head and secure with bobby pins.

Voila!

photography by Jessica Peterson
hair and styling by Rubi Jones of She Lets Her Hair Down
concept and styling by Brittany Watson Jepsen
flower illustrations by Tanner Boyes
model Caitlin Watson

Share on FacebookTweet about this on TwitterPin on Pinterest

collaborations + Design + DIY + hats + Projects / Wednesday, 23 Jan 2013

In her hair Part 2

Part 2 of my collab with Jessica Peterson and Rubi Jones. Again, I didn’t have much time to prepare for this one, so most of our selection was from going through Caitlin (our model and my sister)’s closet. For her BFA final last year her theme was patterns and she made her own patterns and turned it into clothing and then made outfits for everyone in attendance. (I wrote about her show, She Comes In Color here). I thought it would be fun to use them for the shoot. She had also made a number of belts (see below for DIY) which Rubi styled into her hair as a turban. I love how it turned out! Caitlin made the geometric background on Jessica’s great blackboard backdrop. Rubi made an awesome tutorial on how to get her curls (she didn’t use a curling iron!), which you can find on her blog, She Lets Her Hair Down.
Caitlin was kind enough to show us how to make these belts. And you’ll never guess what they were made of. Go ahead, scroll down to the materials. 

Materials: two large plastic trash bags (are you kidding?!), yarns in the colors of your choice, scissors
Step 1: Lay flat one of your plastic bags on your workspace.
Step 2: From the bottom right corner, fold the corner like you would a bandana until you reach the other top left corner. This makes it so you have one large trash bag to work with.
Step 3: Twist your trash bag. You will repeat the same process to the other one later.
Step 4: Grab the end of your trash bag and fold the end in about an inch or so.
Step 5: Now grab one of your yarns and tie a knot.
Step 6: Wrap the yarn so you go up close to the end of your folded trash bag and then come back down so you cover your fold. Make sure your wrap is good and tight here so your end won’t fall apart.
Step 7: Keep wrapping your yarn, giving a good 6 inches of length.
Step 8: Making the loop: Fold the end of the already wrapped trash bag. Make sure you have a good sized loop about 2-3″ hole.
Step 9: Pinch it tight.
Step 10: Wrap yarn tightly around your pinched bag. Wrap up towards the loop and then back down. This will make it secure.
Step 11: Keep wrapping your yarn another 2-3 inches. You can keep going longer but you can also change the color.

Changing the color of your yarn
Step 1: Cut your yarn, allowing it to have a good length of tail.
Step 2: Grab another color of yarn and tie it around the bag where you ended the last color. Give it about 1/2″ space.
Step 3: Make sure you knot the new color so the tail of the last one is under it.
Step 4: Wrap up the yarn close to where you last ended your previous color and then come back down and keep wrapping for as long as you would like.
TIP: The pressure of your wrapping can vary. This helps make it different widths throughout the whole belt.
Step 5: Change up the color whenever you wish to follow step 4.

Joining together
Step 1: Stop your wrapping until you are about 3-4″ from the end of your first trash bag.
Step 2: Grab your other trash bag. Repeat step one.
Step 3: Fold the end of the second trash bag so you have a good clean end.
Step 4: Take your first wrapped trash bag and your new one and overlap the ends.

Step 5: Start wrapping around both of them.
Step 6: Tightly wrap your yarn in multiple places on both of the ends.
Step 7: Now you can go backwards to cover the first bag and keep wrapping until you come bac to the second bag. Keep on wrapping.

Step 8: Keep going until you have a strong joint.
Step 9: Repeat with all the colors you would like.

Folding the end
Step 1: Steop when you are about 2″ away from the end.
Step 2: Fold the end and wrap around the yarn to secure it down.
Step 3: Wrap until you reach the end.

Finishing up
Step 1: Fold the end about an inch against the bag.
Step 2: Pinch it tight and wrap it tightly so you cover it all.
Step 3: Once you feel like you covered everything up, tie a knot through the hole of the pinched end.
Step 4: Cut your yarn so you have about an inch of tail.
Step 5: Grab your scissors and use it to tuck your tail in the little hole of the pinched end.
There you go! Use it as a belt, headpiece, necklace. The sky’s the limit! 

Photography by Jessica Peterson
Hair (and tutorial on how to get her non-curling iron curls) by Rubi Jones of She Lets Her Hair Down
DIY  by Caitlin Watson
Concept and styling by me

Share on FacebookTweet about this on TwitterPin on Pinterest

collaborations + Design + flowers + Projects / Tuesday, 22 Jan 2013

Flowers in her hair…Part 1

Rubi Jones, the creative mastermind hair stylist behind She Lets Her Hair Down, was visiting Salt Lake City for a few days a couple of weeks ago just as I moved here to UT. You see, Rubi lives in Paris and I had hoped that there’d be a way to get her to Copenhagen, but alas, here we meet in America. I love this little world of ours. Anyway, we had to act fast and Jessica Peterson, a wonderful photographer in SLC, happily stepped in to work her magic. My sister, Caitlin Watson, was kind enough to step in as our model and together we had a great day. Caitlin and her boyfriend, Tanner, promptly got to work making some fancy chalkboard drawings to accompany the scene–just off the cuff!

As you may know, I have a thing for flowers, and I’ve been wanting to do my take on a honkin floral headpiece…so without further ado…honkin floral headpiece, meet the internet, internet meet honking floral headpiece. Are we good now?

I have to give a bit of background behind the shoot. Like I mentioned, I had moved here 3 days prior to the shoot so I wasn’t working with a whole lot (I left my whole craft supply/resources back in Denmark). We drove to Costco on the way there to pick up the most photogenic flowers we could find, which turned out to be these purple mums and some pink and peach carnations. Then we dropped by the thrift store to see if we could find a backdrop and low and behold we found this bright floral bedsheet. Caitlin has a vintage dress wardrobe that could clothe the populations of 4 countries in Africa, so we were set.

We have three scenes from the shoot so stay tuned over next few days.

photography: Jessica Peterson
hair: Rubi Jones of She Lets Her Hair Down
model: Caitlin Watson
concept and styling: me

Share on FacebookTweet about this on TwitterPin on Pinterest

DIY + holiday + Projects + valentine's day / Monday, 21 Jan 2013

Send a Valentine’s day care package

Being married to someone from another country we’re always away from family in some way so care packages are of utmost importance (remember the Ultimate Care Package?). And because you can pretty much send anything through the mail I got to thinking of all things heart shaped, which lead me to the idea of making a box, which lead me to think of paper mache boxes. I thought they’d be a fixture at Michael’s, but turns out they only sell small little 3 inchers so I had to buy one on Amazon. I’m sure it will get a bit of damage in transit, but I don’t really care because I think it would be a joy to receive if I do say so myself.
You will need: paper mache heart box 12″ (see link for where I bought mine), paint brushes, acrylic paint (choose your own, but definitely get a white), goodies to fill the care package (conversation hearts are a must!), pencil, eraser, white paint pen
Step 1: Paint the outside of the box pink. Paint inside if you’re hard core.
Step 2: Use a pencil and write in simple lettering your phrase.
Step 3: In a darker color, paint on the letters.
Step 4: Use white on the outside of the letters to create a relief.
Step 5: Do your goody thang.
Step 6: I used a white paint pen to write on the address onto the other side. 

I’m kind of stoked to take it to the post office and ship it on it’s way. There’s a chance it might be cheaper to send it with one of those flat rate boxes, but I’ll give it a go this way for ultimate impact. I’ll let you know. Paul’s brother is in for a treat.

Wanna see some more Valentine’s surprise ideas?
Heart attack idea
Heart attack in the lawn
Heart attack in the snow

Share on FacebookTweet about this on TwitterPin on Pinterest