DIY Statement Headbands Inspired by Amanda Gorman

Statement headbands have been trending over the past few years and they are here to stay for 2021, thanks to Amanda Gorman! We’ve seen a resurgence of headband designs made with velvet and satin, embellished with pearls, rhinestones, and beads. They almost resemble Renaissance and medieval headwear that adorned the hair like a tangible halo glow. On Inauguration Day, Amanda Gorman glowed as she read her poem, “The Hill We Climb,” and her red headband simply accentuated her shine. Gorman’s “fiery red” headband by Prada quickly sold out since her speech, so we wanted to recreate the look by making our own headbands.

How to Make Your Own Statement Headbands

Supplies:

Plain 1.5 inch wide headbands (without teeth), 1/4 yard upholstery foam (½ inch thick), a permanent marker, scissors, a glue gun and glue, 1/3 yard fabric, a satin ribbon to finish.

Amanda Gorman headband DIY

Puffy Amanda Gorman Headband:

  1. With your permanent marker, trace the outline of your headband onto the foam. Cut it out outside the lines, giving about half an inch of ease on each end (as the foam bends it scrunches up a bit and loses some length). If you want your headband to be extra tall, cut two foam shapes.
  2. Making sure the foam and the headband are centered, glue the foam to the top of the headband. It’s easiest to keep it centered  if you start with the two ends, then glue the top and sides.
  3. If you are making yours extra tall, glue another layer of foam on top 
  4. Trim the foam to create a smooth silhouette. It’s especially helpful to trim down the foam by the ends of the headband so that it tapers. Take your time on this step.
  5. Cut an oval of fabric 24 inches long and six inches wide. 
  6. Center the headband on the fabric and wrap the fabric up and over the foam. Glue the fabric to the underside of the headband. Repeat on the other side. It’s best if you keep the glue on the center of the underside of the headband so that it can be covered with the ribbon later. If you have excess fabric, trim it off. 
  7. Work your way around the headband, smoothing out big wrinkles along the way. 
  8. Trim the excess fabric from the end of the headband, leaving about an inch. Fold it under the bottom and secure with glue. 
  9. To finish your headband, cut a length of ribbon long enough to run the entirety of the inside of the headband with about an inch to spare. Glue the ribbon to the underside of the headband, covering any raw edges. Fold the end of the ribbon under to create a clean edge and secure with glue. Where the headband tapers fold both sides of the ribbon under so that the ribbon doesn’t extend beyond the sides of the headband. Glue down and repeat on the other side. 

Amanda Gorman headband DIY

Braided Headband:

  1. Cover the headband in fabric. To do this, cut a three inch wide strip of fabric just longer than the headband is. Center the headband on the fabric and glue it down so that it covers the top, and fold the ends under the headband. Secure with hot glue and press down to avoid pesky bumps. Trim away excess fabric. 
  2. Cut three four-inch-wide strips of fabric and fold them over so that they form a hollow tube. Dot hot glue along the side of each and secure the fabric tubes. 
  3. Stack the three tubes and glue them together. Loosely braid the three strands together, taking care to keep the glued seam down. It can help to tape the strands to a table here. Secure the end of the braid with hot glue so that it doesn’t unravel.
  4. Starting in the middle of the braid, attach it to the top of the headband, with a dot of hot glue. Plump up the braid as desired and glue the braid down across the length of the headband. We pulled the braid a little bit tighter at the ends so that it would have more dimension at the top and taper at the sides. Trim any excess braid where the headband stops and add a dot of hot glue to the strands to keep them from unraveling.
  5. To finish your headband, cut a length of ribbon long enough to run the entirety of the inside of the headband with a few inches to spare. Glue the ribbon to the underside of the headband, covering any raw edges. Starting on one side, trim the ribbon so it extends just beyond the end of the headband and fold it up over the bottom. Secure it with glue. Cut a three inch piece of ribbon and glue it to the inside bottom of the headband. Fold and glue the end of the ribbon to create a clean edge, and wrap it around the base. Secure with glue and repeat on the other side. 

Knotted headband:

  1. Cover the headband in fabric. To do this, cut a three inch wide strip of fabric just longer than the headband is. Center the headband on the fabric and glue it down so that it covers the top, and fold the ends under the headband. Secure with hot glue and press down to avoid pesky bumps. Trim away excess fabric. Cut the fabric so that it ends right where the headband ends.
  2. Cover the raw edges of the fabric with a strip of ribbon. Cut a length of ribbon long enough to run the entirety of the length of the headband and glue it down, covering any raw edges. Don’t worry about the ends of the headband; we will finish those later. 
  3. Cut a strip of fabric six inches wide and about 30 inches long. Fold it over so that it forms a hollow tube. Dot hot glue along the side and secure the fabric tube. 
  4. Tie a loose knot in the center of the fabric tube. Make sure that the seam side isn’t up in the knot or on the top of the strips coming off the knot on either side. 
  5. With a dot of hot glue, secure the knot. Use another dot of glue to adhere the knot to the top of the headband. 
  6. With the seams down, glue the strips of fabric to the headband. Fold up the ends and fold in the sides, and wrap these around the bottom of the headband. Secure with hot glue.

As Amanda Gorman stated within the last lines of “The Hill We Climb,” may we be brave enough to be the light, in our country and our world.

We want to see how your style your Amanda Gorman headband! Tag us on instagram so we can see your iconic looks. 

Amanda Gorman headband DIY

DIY Block Printing with a Potato

DIY block printing stamping art with potato

Perhaps our favorite thing about this project is it is just as fun for kids or adults! The short material list and simple shapes make it a very kid-friendly craft. However, this is just a starting point for any design you want to try! Try out more intricate design at any skill level.

How to stamp with a potato

Supplies:

  • Potatoes
  • Acrylic or fabric paint
  • Paintbrush
  • Fabric or paper surface you want to print on

Steps:

  1. Cut your clean potatoes into the shape you would like to stamp. We used half circles but you can stamp in any shape!
  2. Apply paint evenly to one edge of potato stamp
  3. Press firmly down on your paper or fabric surface
  4. If you would like to combine two potato shapes to make one full color-blocked circle, place both potato stamps before lifting the first, as shown below.
  5. If desired, fill in design more fully after stamping the basic shape.

DIY block printing stamping art with potato DIY block printing stamping art with potato

What to block print on to

We choose to block print onto a canvas art supplies portfolio, we have holding our coloring pages and supplies!

In the past we have also stamped onto bandanas, napkins, wrapping paper, and more. The options are limitless! If you chose fabric, just make sure to use fabric paint.

DIY block printing stamping art with potato DIY block printing stamping art with potato

More block printing and stamping tutorials

DIY block printing on bandanaDIY block printing stamping on linen napkinsDIY block printing stamping art on ceramic plates

Read our interview with one of our favorite professional block print artists, Jen Hewett, here!

Once you start stamping you won’t want to stop. We know from experience. Though block printing is probably our favorite method, there are plenty of other fun ways to make your own design. Try this method for stamping onto a ceramic plate.

What other unexpected supplies have you used to block print? We would love to hear! Comment below

DIY Pencil Case

30 Minute Pencil Case

I’m not exaggerating when I say this pencil case is super quick to make. Seriously, it took me 30 minutes to knock out one of these babies–easy enough that it made me want to make 3 more colorways (which I did, of course). I couldn’t resist, I had to try out the new designs in our Spoonflower shop! The nice thing, too, is that you can just order a fat quarter and it’s plenty to make multiple pencil cases. 

How to Make a DIY Pencil Case

Here’s how to make your own DIY pencil case:

Prepping the Fabric

  1. First, order the fabric. As I mentioned above, we used our Spoonflower designs: blue windowpane, pink windowpane and this retro rainbow stripe. A fat quarter is a sufficient quantity. You can use a variety of fabrics, so use the one that you like most. We used petal signature cotton.
  2. Once your fabric arrives, don’t forget to prewash!
  3. When your fabric is washed and dried, iron it out nice and flat.
  4. Now, cut two pieces of fabric that are 11”x 6” each.

Sewing the Zipper

To sew the zipper, follow the instructions outlined in the pencil case template.

Assembling Your DIY Pencil Case

With the zipper in place, you’re now ready to assemble the rest of the pencil case!

  1. To assemble the case, with right sides together, sew around the remaining three sides of the two fabric pieces. Sew as close to both ends of the zipper opening as you can. Leave the zipper partially open so you can flip it right side out after.
  2. Finish the seams of the three sides with a zig-zag or overlock stitch.
  3. Now, pull one corner in and press out perpendicular to the side seam. Measure down from the point by 1” and sew along that 1” mark. Repeat for the other corner.
  4. Clip the excess fabric at the corners and finish both those raw edges.
  5. Now you can flip your pencil case right side out and admire!

More Inspiration

Stay tuned for more back-to-school crafts and DIYs coming soon, like this DIY drawstring backpack made from a tote bag! In the meantime, check out some of my favorite back-to-school projects from years past, like this DIY reusable lunch sack or DIY apple lunch sack. Also see these back to school stickers (find them in our shop!) and these creative homeschool activities. And don’t forget to check out these tips for designing the perfect dorm room!

DIY rainbow ricrac placemat clutch

DIY ric rac clutch made from a placematHas anyone else been daydreaming over resort collections? Maybe anxiously anticipating the release of spring collections? Guilty. Loeffler Randal, in particular, has caught my fancy with their overload of ricrac and rainbows! They are speaking our language! So we’re taking a page from their book with this DIY Rainbow Ricrac Clutch! But that’s not all: this clutch is made from a placemat. Yep, a placemat. In other words, not only will this clutch brighten up your wardrobe, it will cost you less than $10! We’re sold. Every day is worthy of a rainbow so go ahead and make this Rainbow Ricrac Placemat Clutch and daydream of warmer days ahead!DIY ric rac clutch made from a placemat

Get the full tutorial!

DIY Gold Foil Star Crown

We could have bought one for her as our gift, but what’s the fun in that when you can make it yourself and then have that added special sentiment? We made a template just for it so you can either hand cut it or put it into your craft cutter.

DIY Paper Gold Star crown

Materials:

Instructions:

  1. Using the template cut and out as many stars as you will need. The amount of stars you need will vary depending on the size of the head you are creating the stars for. All of the large stars have 3 stars stacked and the small stars are stacked with two.
  2. We used a craft cutter to cut out stars but you can do this with scissors or an x-acto knife.
  3. Once you have the right amount of stars cut out you will gold foil them.
  4. To gold foil the stars you will apply a small amount of gold leaf adhesive, allow 10 seconds to dry and apply a sheet of gold leaf.
  5. Allow 2-3 minutes for the gold leaf to set and then gently brush away using your soft bristle brush.
  6. Repeat step 5 on the other side. If you feel it looks okay you can just cover one side, however, Later on you will turn the edges up slightly which may reveal more color than you would like to see of the back. We covered both sides.
  7. Once all of your stars are foiled you will begin to stack them.
  8. To stack your large stars you will use a variation of three sizes of large stars and to connect them you will use a small dab of hot glue. Be sure you are placing them correctly because if you have to pull it off to replace it it will pull off the gold leaf.
  9. For the small stars you will repeat step 6 however you will only stack 2 of the small ones.
  10. Once all of the stars are stocked correctly you can begin laying them out on top of the string so you can adjust the placement and check that you have enough to make sure you have enough of the stars.
  11. Once they are all positioned correctly you can apply them to the ribbon with a small hot glue dab to the gold ribbon.
  12. Once all the stars are attached you will use a dab of hot glue to connect your ribbon ends, try to strategically place your stars so that the stop where the ribbons overlap is covered by a star.

Would love to see if you make it! Tag us with #LarsMakes so we can take a lookie! 

DIY Detachable Rickrack Collar

Collars are super in right now as a part of the whole cottagecore trend and I am DIGGING them. I mean, you have to be super careful about them so as not to appear too 19th century. You can modernize it a bit more by wearing a blouse tucked into pants. I’m not much of a pants owner so I had to go with my dress here, but I’m going to assume that you own pants–am I correct? Ha! A lot of the ones out there are collars connected with the blouse but I wanted one that you could detach and pair with lots of different ones.

I LOVE a collar on kids too, though admittedly, I think I’d probably put it on a girl if I had one more than my boys. But, who cares?! They’re so fun! Almost like a necklace.

Rickrack is the braided trimming in a zigzag pattern often used as decoration on clothes. In the past, we used them to embellish blouses, and most recently, we used them in our baby bonnet pattern. We love the trimming so much, we wanted to use it in creating other matching accessories for the whole family. Starting with mom and child, make a rickrack collar that you can attach and detach to any outfit. Because rickrack has such a nostalgic appeal, they will maintain its classic look and feel for years to come. Read on to find out how to make one for yourself using our rickrack collar pattern.  

Materials:

Kid and Adult matching collar pattern, 1 yard cotton fabric (we used this gingham by Robert Kaufman), medium rick rack, matching thread, hooks and eyes, scissors, hand sewing needle, sewing pins, iron, sewing machine. A sewing machine isn’t strictly necessary, but it sure speeds things up! 

Instructions:

  1. Download, print, and cut out the matching collar pattern. If you’re making a collar for a kid, hold up the patterns to one of their shirts to decide which size will fit best.
  2. Cut out your fabric. Make sure that you cut the collar back pieces on the fold!
  3. Pin the collar front pieces to the collar back along the shoulder seam. If your fabric is printed, the right sides should be together.
  4. Sew along the shoulder seams. 
  5. Press the seams open. 
  6. Repeat steps 3-6 with the other collar back and front pieces so that you have two identical pieces. 
  7. With the right sides together, pin the two pieces together. 
  8. Sew around the perimeter of the collar, but leave a gap about three inches long where you don’t stitch at the bottom of the collar back.
  9. Through the unsewn gap, turn the whole thing right side out. Press all the seams so that they’re nice and tidy. Make sure that you press the corners where the collar meets in the front so that you see the point. It can help to push the corner out with a pencil or a skewer.
  10. Starting at the top corners (where the collar will meet just below the neck), pin your rick rack to the edge of the collar. 
  11. Topstitch all along the edge of the collar, securing the rick rack down. This will also close up the gap you used to flip the collar right side out.
  12. You’re almost done! To finish your collar, hand sew the hook and eye on at the top corners. 

If you make this collar we would love to see it! Use #LittleLars to show us. Bonus points if you make two and match with your little one!

Fall 2022 Casetify Collection

This post contains affiliate links. Any time you buy something from our affiliate links, we get a small commission at no cost to you!

Our Obsession with Casetify

horizontal casetify full shot

After we launched our initial collection of phone cases with Casetify, we caught the bug. We couldn’t stop thinking about all the things we could do with those vibrant new designs! While we waited for the launch of our second collection, we got busy with all kinds of projects. First came these painted mini pumpkins. Then there were our retro florals inspired projects, like this tablescape, backdrop, and quilt. We also got sewing and made new team outfits and some other Casetify inspired sewing projects

Spring Florals

Then spring came around, which meant the launch of our second collection, BLOOM. This collection featured all things floral, inspired by the budding blooms all around us. We let those beautiful floral motifs inspire our style, and they found their way onto these lovely nesting Easter eggs, too. 

Our New Collection

Now, one year later, we’re releasing our brand new fall 2022 Casetify collection! We revamped and added to our retro florals with scale shifts, design changes, new color palettes and some fun sparkles. We’ve also added in some completely new designs and motifs (our wonderful designer, Garet, is to thank for the ingenuity and creativity behind the collection). 

Here are some of my personal favorites:

I just can’t get enough of those eyes!

Totally in LOVE with the new retro floral colorways.

And those sparkles–I wasn’t sure how noticeable they’d be, and to my delight, they are glorious in their eye-catching beauty!

Phone Sockets

We thought the launch of our fall 2022 Casetify collection would also be the perfect time for some fresh new phone sockets. We love the way these fun checkers and flowers interact with the new collection and can’t wait to see what you choose! Keep us posted in the comments below!

Our Itch to Keep Designing

Designing these Casetify collections ignited our desire to collaborate with many different types of companies. We’ve fallen in love with the designing part of the creative process and are now looking to partner with other companies. In a dream world, we’d be doing gardening, luggage, coats, swimwear, and anything else that piques our interest (hint hint, if anyone wants to work with us we’re open)! Basically, it comes down to a desire to fill the world with color and joy, and that’s something we feel passionate about. We want to provide a happy, colorful alternative to all of the gray stuff out there in the world.

Speaking of filling the world with color, we already have some things in the works that we’ve been working on this year. We can’t wait to share them with you, so stay tuned!

Casetify Coupon

You can take 15% off your Casetify order with code THTLB15! Order here!

DIY Fanny Pack

Fanny Pack Featuring Colorblock Stripes

My main requisite for this fanny pack was color. If you haven’t read my thoughts on the need for color, see this post and then this one. Well, the world’s lack of color extends to functional accessories like fanny packs. It’s pretty insane to me the number of black fanny packs that appear in a google search. I knew mine, on the other hand, had to be colorful and make me feel happy whenever I put it on.

Well, the perfect opportunity presented itself. We’ve been working on a few different bold stripes to add to our Spoonflower shop, and settled on four different colorways that are amazing together. For all the stripe options we considered, click here.

fanny pack with pattern

 

How to Make a DIY Fanny Pack

Prepping the Fabric

  1. First, prewash your fabric and tumble dry. Here’s the fabric we used.
  2. Meanwhile, download, print and cut out your fanny pack pattern found here.
  3. When your fabric is washed and dried, iron it out flat.
  4. After you’re done ironing, follow the instructions on the fanny pack pattern (here) to cut out your pattern pieces. Make sure to cut the pattern pieces out with the stripes running vertically, if you’re using stripes. When you’re done cutting, you should have eight separate pieces total, two of each of the four colors.

First Sewing Steps

Now you’re ready to sew your fanny pack together!

  1. First, with right sides together, sew the darts, then iron out the crease.
  2. Next, sew the two front pieces together along the center seam with right sides together. Repeat for the two back pieces. Do the same for the lining and iron the center seams flat. You should now have four pieces of fabric total–two front, with the stripes sewn together along the center seam and mirrored, and two back, again, with the stripes mirrored and joined at the center seams (see fanny pack pattern visual to see how the stripes should be mirrored).

Sewing the Zipper

  1. Now it’s time to sew the zipper. For this, line up the two front pieces (outside and lining) with right sides together and pin in place. 
  2. Use the guide on the fanny pack pattern and a fabric marker or pencil to trace the zipper stitch line onto the wrong side of the outside front piece.
  3. After that, sew the two pieces together along the zipper stitch line, backstitching at the end.
  4. Now cut a slit down the center of the box you just sewed. At both ends, leave about a centimeter and cut a slit to each corner, as shown in the step photos.
  5. Next, flip the pieces of fabric right side out and iron. You should now have a neat little rectangle in the center of your two front pieces.
  6. Now, pin the zipper in place inside the box with the front of the zipper facing the front. Using the zipper foot, sew all the way around the box. If needed, you can unzip the zipper a bit to make it easier to sew.

Adding the Lining and Straps

  1. For the lining, take one of the back pieces, line it up with the top front piece and pin, right sides together. Take care to make sure the second front piece is out of the way.
  2. Next, pin the straps in place (you should have two straps that are each 1 yard long). They should be positioned towards the top of the pouch on either side of the zipper, with each end flush with the raw edges of the fabric. The strap should be sandwiched between the two fabric pieces, hidden from view.
  3. Now sew around the “U,” making sure to not sew across the top yet and reinforcing across the straps.
  4. After sewing the first set, repeat for the other two pieces, sewing one front piece to one back piece with right sides together, avoiding the top. You should now have two separate, closed pouches back to back.
  5. Once all the pieces are sewn, stack them inside each other, then line up, pin, and sew the top. Make sure the zipper is open at this point so you can flip the fanny pack after sewing.
  6. Now, finish the straight raw edge with a zig zag or overlock stitch, then flip it so it’s right side out and iron.

Finishing Touches

All that’s left now is to add the buckle and adjustable strap!

  1. You’ll make the strap adjustable first. For this, take the adjustable strap slider and feed the strap through as shown in the photos.
  2. Now, wrap the fanny pack around your waist and adjust until it’s a comfortable fit. Slip around the buckle, cut off the excess (see photos for the visual on how to do this) and sew into place.
  3. Done!

More Inspiration

Looking for more sewing projects? Try these pencil cases and a whole host of sewing projects on the blog! Also see our shop for plenty of templates and patterns. Wanting to improve your sewing knowledge? See our sewing basics series!

Going Green: Using green in decor

Green Style

Find your shade! Are you a chartreuse kind of gal, or a deep emerald? Minty fresh or bright as a lime? This post is filled with every shade of green you can imagine, and we know you can find the shade that matches your personality best!

 

Maybe you don’t normally go all out on St. Patrick’s Day the way we like to here at Lars (we’ll take any and all reasons to celebrate!) Even so, we are handing you the perfect excuse to splurge a little and treat yourself! Is your closet already 50 shades of green? If it isn’t, you’ll be surprised how much adding in this fun color puts a spring in your step! Freshen your closet with these mint woven sandals. Grow your confidence with this forest green blouse. Embrace Grace Kelly vibes with this kelly green sweater. Step into the lime-light with this beaded clutch. This puff-sleeve sweater will have you sea-foaming at the mouth?? Too far? Oops!

 

Green in Decor

Let us give you some sage advice, this dining set is the perfect soft pop of color without taking over your kitchen. We promise, your old room decor will be green with envy. (Ok ok! We are done with the puns this time!)

 

Room Inspo

How to recreate some of our favorite rooms, using green as your inspiration color.

Room #1

 

Image Source

Room #2

 

Image Source

Room #3

 

Image Source

Room #4

 

Image Source

Room #5

 

Image Source

You can find all the mood board photos on our Pinterest, here!

Christmas gifts for kids

Christmas gifts for kids

Here’s the rest of my guide for christmas gifts for kids. Hopefully there’s a price point for every pocket! I wish they made all of these in adult sizes! I’d be happy with that for sure! And once again, fair isle sweaters for the win!

You can see the rest of our guides here:

Holiday decorations gift guide
Christmas gifts for women
Christmas gifts for kids

Stay tuned for more:

Christmas gifts for men
Stocking Stuffers
Christmas gifts for crafters
Design books

Valentine’s Day Activities

Galentine’s Day Activity Ideas

As you are probably aware, Galentine’s Day has a special place in our hearts. What started out as a classic Parks and Rec joke has since become an iconic tradition for women all over. And is it really that hard to see why? Everyone should be cherished and loved for who they are, whether they have a significant other or not. Galentine’s Day is a special opportunity to share the love so it’s not a glum holiday for anyone who won’t spend Valentine’s Day at a fancy restaurant, staring dreamily across the table at their significant other.

Galentine's Day party

We’ve done a few different things with Galentine’s Day in the past, like this and this. We also wrote a post a few years back with lots of fun Galentine’s Day activities, which you can read more about here.

Here are a few more suggestions we’ve dreamt up since that last brainstorm post of ideas:

Craft Night

A craft night is the perfect thing to do with the gals on Galentine’s Day. It’s fun, interactive, and you get to bring home some lovely memoirs, too. For your convenience, we’ve compiled a list of easy DIY valentines, like our valentine face boxes, that are just the thing for a Galentine’s Day craft night. Another absolutely adorable and timeless valentine we recently made and are obsessed with are our Hand and Heart Love Tokens! You won’t regret adding them to your list of Galentine’s Day activities. Also, try wrapping a candle or chocolate bar to send home with the gals.

galentine's day gift boxes

Speaking of making DIY valentines, why not make this sweet little valentine box to put them in?

Spa Night

We could all use one, right? Galentine’s Day is the perfect excuse to stop putting it off and actually make it happen! Here are some must-have spa items you’ll want to stock up on:

Game Night

We wouldn’t say no to a night of games with the gals. Try our printable Valentine’s Day song bingo, or our Valentine’s themed tic tac toe. Or here’s an assortment of a few different printable table games!

Party Favors

Send your ladies home with a sweet little package of party favors! Some of our favorites from the shop include these heart hair ties, ombre spiral hair ties, these wooden heart clips, valentine’s themed pins, and these adorable Valentine’s Day stickers.

And here are some other sweet little party favors to include!

Valentine’s Day Activities For Kids

We don’t want your kiddies to feel left out on Valentine’s Day. I mean, aren’t they the most precious of all? In our post where we listed Galentine’s Day activities, we also mentioned some great ideas of things to do with your kids from the team here at The House that Lars Built.

Crafts

Obviously crafts make it onto every list of activities we ever make. As with Galentine’s Day, we think this post of easy DIY valentines is great for all ages, kids and adults alike. Sit down with your little ones and help them make valentines for school with these sweet cherry tootsie pop valentines or paintbrush valentines. Then help them decorate their own valentine box!

Becca's Top 15

Printables

If you’re looking for a craft that doesn’t require too much time and energy but is still perfect for Valentine’s Day for your kids, check out our little food pun valentines! Eggs, Frogs, Veggies, there’s something for every kid. Oh, and don’t forget about these cute as a button valentines or these other clever pun variations.

Games

Speaking of printables, we have some fun valentines games that are perfect for little ones available in the shop! We love these coloring placemats for a variety of ages, as well as this assortment of table games–just print them off and you’re ready to play. It includes bingo, tic tac toe, would you rather, and those sweet coloring placemats.

Write Love Letters

Encourage you kids to write little letters to those they love! Don’t worry, you don’t have to scare them off the dating scene in the 3rd grade. Have them write notes to siblings, parents, grandparents, teachers, or friends. For those who are far away, print off these little love postcards to send. And see our shop for endless options of printable valentine cards your kids can write their notes on.

printables

Bake Together

I don’t know about you, but I’ve noticed that baking always tends to be a big part of Valentine’s Day activities. Get together and make some conversation heart sugar cookies to put in these little conversation heart cookie boxes. If you’re in the mood for cupcakes, these and these are both great options for some sweet little cupcake toppers. Or, go all out and bake a Valentine’s Day cake. Complete it with this lovely cake topper! For inspiration, can you believe how intricate and delicate these beautiful cookies are?! A few years back, Arlos cookies was kind enough to collaborate with us to make the valentine cookie magic happen.

Strawberry Heart Cake Topper

More Inspiration

Loved this post on Valentine’s Day Activities and need more valentines-related ideas? See our gift guides for men and women and get some gift ideas for your S.O. this year.

I Voted! printables and embroidery pattern

Embroidered “I Voted” Pattern

As you know, we’re getting more and more into embroidery (Celebrity crush dolls anyone?!) and the idea of making something that will last a little bit longer than a throw away sticker is really appealing. In this way, it acts more as a patch than a pin. We couldn’t be more proud to let people know that we voted so might as well keep it up all year long!

How to embroider an “I voted” pin

Materials: see above

Instructions:

  1. Print out the “I Voted” embroidery pattern. Use a sharp pencil to poke through the paper on the felt along the lines of the type (you can also use embroidery transfer paper).
  2. After poking through with a pencil, remove the paper and lightly connect the dots to create lines.
  3. Trace around the pattern pieces and cut out pieces following instructions on pattern.
  4. Once pieces are cut embroider the type with a satin stitch on the smaller pink circle.
  5. Once that is done, center it on the background felt color and pin them together.
  6. To connect the back and front, whip stitch the edge of the front circle to the back circle following white stitching.
  7. Attach last circle to back to create backing.
  8. Using hot glue attach the broach piece with hot glue.
  9. Wear around to let everyone know you voted!

If you are printing stickers use the instructions on the sticker paper to create your stickers!

“I voted” printable stickers

Make your own “I voted” stickers by downloading our set of 5. There’s an option for “I absentee voted” and even one in Spanish. You can find the full set here.

We can’t wait to see you wearing these around! Will you be printing yours off as a sticker or embroidering them? Be sure to tag us with #larsmakes so we can see them!