Twisted Birthday Candles

Whether you’re a fellow birthday traveler or contentedly partying at home, you can also celebrate your birthday in style with these very on-trend twisted birthday candles.

three twisted candles on a green ceramic plate next to a birthday cake. There's confetti around and the background is red and blue.

What We Learned About Twisting Candles

Do you remember when we showed you how to DIY the twisted candle trend? Well, what you didn’t see then was that it took some serious trial and error to get the candles to come out right. It turns out that when you’re making big twisted candles, you’re working with kind of a thick pillar of wax. You have to be really careful about temperature (not too hot!) and how long you leave the candles in the warm water (a surprisingly long time!). If not, you run the risk of melting the outside and leaving the inside cold and hard. Don’t get me wrong! It’s still a great project with our Lars stamp of approval.

Twisted birthday candles on a white cake with a red background.

I’m pleased to announce, though, that miniaturizing the twisted candle trend bypasses a lot of the project’s potential pitfalls. And thus: twisted birthday candles are born!

Close up of twisted birthday candles on a white cake with a red background.

The narrower candles don’t have to sit in warm water for as long before they get nice and floppy. This means that they’re far less likely to snap or crack when you’re flattening or twisting them and sets you up for twisted birthday candle success!

A flat lay of twisted birthday candles and confetti on an orange background.

Make Your Own Twisted Birthday Candles

You will need:

Long birthday candles, water, a tall, microwave-safe vessel (I just used a mason jar!), a microwave, parchment paper, a rolling pin.

step by step instructional photos of twisting birthday candles

Instructions:

  1. Fill your jar, vase, or tall glass with water.
  2. Warm it up. I found that a few 30 second blasts in the microwave did the trick. It’s key here that your water is warm enough to soften the candle wax without just melting it. Think pleasant bathwater, not hot tub.
  3. Place your birthday candles in the water and let them soak for several minutes. I recommend using more candles than you’ll ultimately need to make room for error.
  4. Your candles are soft enough when they start getting floppy. You’ll want to work with them one at a time and return them to the warm water after you work with them. If at any time the candle you’re working with starts getting stiff, just plop it back into the water until it’s nice and soft again.
  5. Flatten your candles. Put a candle on parchment paper, then fold the paper over the candle. Use a rolling pin to flatten the middle of the candle, leaving its base unflattened so it can easily stick into a cake. Return the candle to the water and repeat for the rest of your candles.
  6. Twist your candles. Take a soft, flattened candle out of the water and gently twist it. If you want it to be very twisted you will probably have to return your candle to the water a few times. Experiment with different degrees of twistiness to find what you like best.
  7. Twist all your candles, then dip them in cold water to harden them.
  8. Don’t forget to make a wish when you blow out the candles!

Close up of twisted birthday candles on a white cake with a red background.

More Birthday Decorations

These twisted birthday candles would be lovely on any cake, but in case COVID got you worried about blowing on a communal cake you could celebrate with cupcakes and this individual cupcake stand.

Check out the printable birthday suites in the shop and browse even more of our Lars birthday decor, because you deserve the most festive birthday party around!

If you’ve aged out of your pin the tail on the donkey years but still are looking for engaging birthday party games, use this birthday bucket list printable! Entertain your guests and find out about their favorite things, and facilitate conversation all in one fun activity.

And most of all, happy birthday!

A flat lay of twisted birthday candles and confetti on an orange background.Twisted birthday candles on a white cake with a red background.

Printable Party Decor

I want your parties to be smash hits, and the printable party decor from our shop are surefire ways to get off to a great start. The Lars party suites are downloadable packages of invitations, party decorations, cake toppers, and accessories. And they couldn’t be easier to use! Just download, print (or send to a a local print shop), cut out, and voilà! Party magic.

Most of these party suites were designed with birthdays in mind, but whether you’re celebrating a birthday, graduation, an engagement, an anniversary, a holiday, a new move, or just getting friends together, these party decorations are sure to put smiles on everyone’s faces and make your party better (and prettier!) No matter what you’re celebrating, pick out the perfect printable suite below!

Birthday Parties

Part of why I enjoy birthdays so much is because they’re an opportunity to do what you really want to do. If that means skydiving, go for it! It’s your birthday. If that means staying inside and watching The Holiday, 10 Things I Hate About You, or Roman Holiday on repeat, go for it! If that means eating a decadent cake, go for it! You do you!

Now that vaccine availability (in the US, at least) is abundant, I’m so excited to bring people together and get back to celebrating. And what’s a party without invitations and decor? These printable birthday suites are the perfect solution when you want fun decoration without too much fuss. Since releasing our original printable birthday party decor, we have been dreaming up even more unique themes. 

Rainbow Party

Printable Birthday Party Decor

Of course we started with a rainbow theme, and this one works for all ages! This rainbow birthday theme can go as many directions as there are colors in the rainbow. Planning for your miracle child? Plan a rainbow baby party! Your mom is turning 50? Ditch the dark “over the hill” cards and plan an “over the rainbow” party instead! This party suite would also be perfect for a Pride party! #LarsLovesLove

This Rainbow Party Decor Suite includes an invitation, bracelets for party favors, a birthday crown, and more! Check out the full printable suite here.

Animal Menagerie Party

Printable Birthday Party Decor

This is our most classic birthday set, a colorful circus of animals! I cannot wait to use this one for a first birthday party for baby boy #2. For this party we also added some DIY felt pennants that can be customized for the birthday kid. Pssst, level up your party EVEN MORE with a simple balloon installation kit.

This Animal Menagerie Party Decor Suite includes party hats, bunting, an invitation, and more! Check out the full printable suite here.

Summery Parties

Having a June birthday means that I can throw garden-themed birthday parties for myself, but here’s the truth: garden parties are for everyone! Celebrate Midsummer or simply bring your friends together in honor of the the long days and warm nights that the season brings.

Floral Party

Adriana Picker from our print shop made the art for this Floral Birthday Suite and it couldn’t be prettier!

Sherbet-colored floral bunting hangs in the background. A white frosted cake with floral cake toppers sits on a mint green cake stand. Invitations and a floral crown peek in at the corners.

I love the elegant colors and the botanical drawings in this collection, and I think the different colors of invitations are so delightful. And don’t get me started on how gorgeous the printable flower crown is! These decorations will make your party glamorous and colorful and fresh.

Detailed drawings of flowers make up a fuchsia and orange flower crown, which is resting on a pile of sherbet-colored plates. Floral party invitations with different flowers on pink, grey, and yellow backgrounds sit amongst floral bunting and cake toppers.

Lemon Party

Printable Birthday Party Decor

The fun colors of this birthday suite printable makes for the perfect theme, whether your birthday feels sweet or sour! The rest of the decor comes easily once you’ve got a theme down! In fact, we have a few other DIY projects from days past that would be darling with the birthday suite. This lemon wreath is one that stands out in my mind. Or, plop some freshly sliced citrus in the middle of the table for a citrusy centerpiece like we did here! And the colors of our original balloon kit have the perfect fruity feel!

This Lemon Party Decor Suite includes a banner, straw toppers, party hats, and more! Check out the full printable suite here.

Garden Party

Printable Birthday Party Decor

Another thing that comes much easier when your party has a theme is planning the menu. Thanks, theme! When paired with this printable garden party decor, fruity desserts are always a hit. I went through a popsicle phase a few years back and wrote about three I loved: lemon creme, pineapple pink lemonade, and berry lemonade! These are perfect for when you want a treat but don’t want to turn the oven on. Who said every birthday party HAS to have a cake? 

We designed these themed set for a dreamy summer outdoor party (it doesn’t even have to be a birthday party, an excuse for a party is good excuse.) However, as we head into winter I am starting to daydream up an indoor garden party. Hear me out — paper flower garlands and greenery turning the living room into a summery dream. Sounds like just the thing for seasonal depression, right??

This Garden Party Decor Suite includes an invitation, name tags, cake toppers, and more! Check out the full printable suite here.

You deserve to party, whether it’s your birthday or not! Take time to decorate extravagantly (and easily) with a little help from your friend, Lars. Then do exactly what you want to do. Go to the grocery store and just buy snacks and flowers. Dance obnoxiously to Motown classics. Dress up in a formal gown and don’t bother styling your hair. Plan a fabulous meal for yourself and make someone else cook it/buy it. Eat ice cream straight out of the carton. I won’t tell!

Holiday Parties

Don’t limit your celebrations to birthdays and summertime!

Easter Printable Tablescape Suite

Easter printable tablescape with flowers and rabbits and a floral garland. Your next Easter party will be your most picturesque with this Easter Tablescape Party Suite! With an illustrated table runner, menu cards, name cards, and a garland, this hassle-free printable decor is sure to become a favorite.

Halloween Party

Halloween party invitations, placemats, place cards, and party tags arranged on a table

Halloween parties are fun for all ages, and they deserve fabulous printable party decor, too! This Halloween Party Suite includes printable invitations, party tags, placemats, and place cards.

Head to our Shop for even more printable birthday party decor and gift ideas! And you can find all of our Birthday DIY projects here

DIY Grocery Store Flower Bouquet

I love making grocery store flower bouquets. Before I learned a few simple flower-arranging tips, though, I used to buy pre-made bouquets from grocery stores, trim the ends, and dunk them into a vase as is. It looked decent and there’s nothing wrong with doing that, of course! But learning how to arrange flowers properly helped make a simple flower arrangement look like a professionally made bouquet.

A bouquet made of eucalyptus leaves, chamomile, roses, and hydrangeas against a pink wall with a mint green jewelry box in the background.

Buying a beautiful floral arrangement usually costs an arm and a leg. You can make a beautiful bouquet of your own with a fraction of that cost with flowers from a grocery store! Follow the step-by-step tutorial below to learn the tips and tricks.

Detail shot of eucalyptus leaves, chamomile, roses, and hydrangeas against a pink wall with a mint green jewelry box in the background.

Make Your Own Grocery Store Flower Bouquet

When you’re buying flowers for a bouquet, consider a color scheme that you want to design around and look for a variety of shapes and textures.

Detail shot of eucalyptus leaves, chamomile, roses, and hydrangeas against a pink wall with a mint green jewelry box in the background.

There are four basic categories to look for when making a bouquet. First choose larger blooms that will be focal points (like hydrangeas, roses, peonies, zinnias, tulips etc.). Second, line flowers (like goldenrod, calla lilies, or other flowers that form a strong visual line) or accent flowers (spray roses, carnations, eryngium, etc.). Third, get filler flowers (like chamomile, wax flower, or baby’s breath). Fourth and finally, choose greenery or foliage for your bouquet.

Choosing a vase for your arrangement is too-often overlooked. Whether you want something colorful or subdued, putting some thought into your vessel will elevate your bouquet. I put together a list of some of my current favorite vases here, or DIY a paper mâché or recycled egg carton vase with these tutorials!

Instructions

A person using a knife to trim the bottom of a stem next to some roses and a vase on a picnic table.A person removes rose leaves from a stem. In the background are rose petals, greenery, and a purple and white vase on a picnic table.A person arranges eucalyptus branches in a purple and white vase.A person arranges bright orange spray roses in a purple and white vase full of eucalyptus branches.A person places hydrangeas in a bouquet of eucalyptus and roses in a purple and white vase.A person places chamomile blossoms in a bouquet of eucalyptus, roses, and hydrangeas in a purple and white vase.

  1. Prepare all your flowers and foliage by trimming off the ends with a sharp, clean knife or some clean flower pruners. Take all the leaves off the bottom of the stems. You don’t want leaves to sit in the water, because then they’ll rot!
  2. Your flowers should have come with a little packet of flower food. Pour this, along with some water, into a vase.
  3. First place your foliage in the vase. Think about the ways that foliage can frame flowers or provide a more neutral backdrop for them. I’m arranging with willow eucalyptus, which has long, elegant leaves, so I’m also considering how they drape. Hold a few branches back to add in at the end.
  4. Next place your line flowers or accent flowers. I used spray roses here.
  5. Arrange the focal flowers in the vase. The stems from your foliage and accent flowers will form a sort of lattice that makes it easier to get your focal flowers right where you want them.
  6. When you arrange your focal flowers, think about how tall you want them and what direction you want them to face. If they’re too long, trim the stems a little bit at a time, because you can all ways take away more stem but you can’t make them grow taller!
  7. Arrange your fill flowers around the focal and line/accent flowers.
  8. Add in any foliage you held back.
  9. Place your bouquet somewhere in your home that you’ll see it often so that you really enjoy it! To keep it fresh for as long as possible, pick the flowers up and trim an inch off the stems every few days. When you do this, make sure there’s plenty of water and it’s clean.

Arranging flowers is a skill that comes in handy all the time, especially if you love having fresh flowers around as much as I do! I would love to see your bouquets at #LarsFlowerMonth

beautiful bouquet made from grocery store flowers

Summer Paper Flower Wedding Bouquet Kit

A couple years ago, we posted a number of DIY paper flower wedding bouquets. Some of our past ones include this colorful Cinco de Mayo bouquet, a stunning white peony bouquet, and the royal wedding inspired bouquet. It was time for another wedding bouquet, as well as a kit! That’s right, you can buy all the materials in one place–our shop!

close up of a paper bouquet made of dahlias, roses, shamrocks, Mexican jasmine, and foliage.

Wedding flowers are usually HUGELY expensive. They are gorgeous and undoubtedly worth the money if you can afford it. HOWEVER, not everyone has the cash for lavish floral decor, accessories, and bouquets. Then, at the end of the big day, most of the flowers get tossed and the ones you keep fade away much too quickly. I have even heard brides talk about coming home from a honeymoon to wilting flowers and feeling all the wedding and honeymoon hype slump down into post-wedding blues. How sad!

close up of a paper bouquet made of dahlias, roses, shamrocks, Mexican jasmine, and foliage.A bride in a white dress against a pink background holds a paper bouquet made of dahlias, roses, shamrocks, Mexican jasmine, and foliage.

But why not make something that will be just as beautiful and will last so much longer? Our paper flower wedding bouquet kit is unique, breathtaking, and won’t wilt. Honestly, if you keep it away from water and out of flames, this baby should last forever!

close up of a paper bouquet made of dahlias, roses, shamrocks, Mexican jasmine, and foliage.

Make Your Own Paper Wedding Bouquet

We have the perfect paper wedding bouquet kit ready for anyone who wants to make their own flowers. To help you get started, we gathered the materials for you (including a lovely ribbon to tie everything together!) so that there’s one less thing to think about as you plan your wedding.

close up of a paper bouquet made of dahlias, roses, shamrocks, Mexican jasmine, and foliage.

We understand that it’s not easy to find the right materials in the correct colors and amounts. It turns out that lots of these materials (I’m looking at you, crepe paper) only come in bulk! Getting started and gathering the materials is probably the hardest part, so we took care of that for you! By buying our kit, you’ll save a lot of time, headache, and money, as well as templates and instructional videos.

A bride in a white dress against a pink background holds a paper bouquet made of dahlias, roses, shamrocks, Mexican jasmine, and foliage.

If you’re not confident about how your paper flower wedding bouquet will turn out, ask a friend and/or family member for help and have a bouquet-making party! The point is, enjoy your time planning while making something meaningful for your special day. This bouquet will become such a meaningful memento of your wedding and the memory of making it will be even more meaningful!

Look for this kit in our shop to make your own, and tag us with #LarsPaperFlowers

 

Easter String Scavenger Hunt with Anagram Balloons

I’m still getting a chance to see how Jasper does sharing his holiday traditions during his first year with a sibling, so I hearkened back to a memorable Easter for me. I stayed with my grandmother and had brought a friend with me (fun fact: she was Jasper’s babysitter last year!). When we woke up Easter morning, the Easter Bunny had set up this elaborate string scavenger hunt. The string led us from one egg to another mixed in with some surprises along the way. Later that day we dressed up in our Easter dresses and played songs by her piano. I even attempted, terribly I’m sure, her violin. It’s one of my favorite memories of my grandmother. 

This year, I decided to recreate it. Of course, we tried it out early this year so we could get the photos for the blog, but he won’t know that it wasn’t actually Easter…until he has it again in two weeks 😉 He ended up having so much fun, and we didn’t even have to leave our house to make it happen making it a great alternative to a huge neighborhood Easter hunt thanks to COVID. Win-win.

A little boy in a pink and blue Easter crown stands in a colorful room filled with Easter-themed balloons.

A little yellow chick balloon on a couch with colorful pillows and an Easter basket. I mixed it up a bit from Grandmother’s version by adding more magic by using my favorite balloon brand Anagram to complete the scavenger hunt. We have done projects with Anagram Balloons for almost every other holiday, but this is our first Easter project! Their little lamb, bunny, and egg balloon designs are so adorable. 

A big Easter lamb balloon rests atop a stack of colorful books in a colorful interior space.

Besides their huge selection of awesome designs, the main reason Anagram is my top choice for balloons is this: they are reusable! Just carefully deflate the foil balloons after use, fold them up, and store them for the next big idea. We have been able to use our Anagram balloons for so many projects over and over again – making for statement holiday projects while still minimizing the environmental impact. In fact, most of the balloons we used for this project we already had on hand! All we needed to add were a few Easter specific balloons to our existing stash. With care, you only need to buy these once just like other decor.

A little boy smiles up at the camera from a yellow rug, where he is lying. He's surrounded by Easter-themed balloons.

How To Set Up Your Easter Scavenger Hunt

The goal of this Easter scavenger hunt is to follow the string to find the Easter Bunny balloon! The Easter Bunny will be waiting at the end with an easter basket full of gifts. We – I mean, the Easter Bunny – filled Jasper’s basket with fun printable gifts from the Lars Shop + plenty of chocolate of course. 

 

On their way to the Easter Bunny, your kids will find balloons along the way with little gifts attached. The string is the perfect way for the kid’s to guide themselves along the hunt and participate fully. I’m considering setting up all my future Easter egg hunts with a string this way! It worked so much better for my 3yo than leading him around the backyard pointing out eggs for an hour…  

Supplies for the Easter Scavenger Hunt

String, Tape, Balloon pump, Lamb balloon, Chick balloon, Egg balloons, Pastel shape balloons

Gifts for the Easter Basket

Printable Easter Crowns, Bunny Hair Clips, Easter Egg Coupons, Bunny Hair Tie , Springtime Activity Kit , Bunny Stuffed Animal, Springtime Printable Activity Pack

Interior shot of an Easter Scavenger Hunt. Balloons are strewn around the room and string zigzags across the space.

Instructions

  1. Place your string in a zig zag pattern all around the room–make it as confusing as you choose!
  2. Along the string, place balloons and little surprise gifts every few feet
  3. At the end of the string, set up the final surprise! The Easter Bunny (a balloon of course) and an Easter basket full of fun gifts

 

We just set up this scavenger hunt around my office and Jasper loved it! This would also be so fun to do on a larger scale filling your backyard.

A little boy holds up a chick balloon. He's sitting on a chair in a colorful room strewn with Easter-themed balloons.

More Projects with Anagram Balloons

We have an Anagram Balloons project for every major holiday! Check them out below:

Valentine’s Day: Balloon Heart Attack

St. Patrick’s Day: Rainbow Lucky Charms Balloon Arch

Baby Announcement or Shower: Foil Balloon Arch

Halloween: Ghost Balloon Installation

Thanksgiving: Macy’s Thanksgiving Day Parade Tablescape 

Christmas: Jingle Bell Balloons

 

This post is sponsored by Anagram Balloons. We love our sponsors who allow us to make beautiful original content for you!

 

A Craft and Treat for Palm Sunday

Palm Sunday lands on the fourth and final Sunday of Lent marking the beginning of Holy Week. When Jesus entered Jerusalem as part of his journey to the cross, crowds cheered and waved palm branches. They also laid the leaves across the road to welcome him. Little did they know how things would pan out in just a few days! But the solemn events of Holy Week remind us of the triumph in the end. Palm branches have long been symbolized for victory and peace; therefore to celebrate Palm Sunday, we have revamped our DIY paper palm leaves so that the victory leaves can set the tone for your Palm Sunday table. The symbolic nature of the leaves will remind everyone of this triumphant occasion and you can prepare the leaves ahead of time as a Palm Sunday craft.

Palm Sunday craft and Resurrection Rolls from The House That Lars Built

How to make your Paper Palm Leaves

To make our Palm Sunday craft this year, we used our past paper palm leaves tutorial and just made them smaller! You can see that past project here.

Supplies:

Instructions:

  1. Trace out your leaf template and cut it out. (We have formatted the the template to cut up to 8.5×11. However, the leaves that we made for our tablescape were smaller. To accomplish this you can use the template and size down by hand or send it to print at a smaller scale.)
  2. Fan your leaf shape: start from the middle fold, choosing one side of your teardrop-shaped leaf to begin making even smaller folds, helping your leaf get that pretty fanned palm look. Repeat on the other side. (you can use a scoring tool to help you get sharper folds)
  3. Color your leaf: before connecting your leaf to the stem, you’ll want to paint it to make sure it gets an even color throughout. BEFORE PAINTING be sure your creases are defined! Then flatten out your shape again, just enough that you can get an even coat of paint on it. Paint and let dry for 1-2 hours! We used spray paint.
  4. While your leaf is drying, make the petiole stem!
  5. Use petiole stem paper cover template (once again this can be sized down on the computer or sized down based off the printed template, or up if you want to make larger palms like did here!)
  6. Fold your stem along the dotted lines on the template.
  7. You should be able to make a long pyramid-looking stem now with your paper! Hot glue the extra 4th fold to hold it all together (leave the extra 2-3 inches at the top unglued).
  8. Paint your petiole stem to match the leaf!
  9. After your leaf is dry, follow your original creases to re-fold your leaf into its fan shape
  10. Take a lollipop stick and place it inside of the most middle crease of your leaf, only a few inches from the bottom. Hot glue it in place.
  11. Cut diagonally from the leaf to the stick to take the excess off of where the leaf meets the stick (refer to photo).
  12. Tape the very bottom together to keep the shape of the leaf fanned and the stick secure
  13. Slide your petiole stem paper cover over the lollipop stick (the 2-3 inch extra end first.) Allow those 2-3 inches at the top to cover the very bottom of the leaf. Also cover the area where your leaf is glued/taped to your stick. Finally, hot glue the top in place.

Resurrection Rolls Recipe

To complete our Palm Sunday craft and tablescape, we added this yummy recipe and family tradition from our Project Manager, Hailey! Her mom would make them every time at this year.

Palm Sunday craft and Resurrection Rolls from The House That Lars Built

“Resurrection Rolls have been a yummy tradition for years in our family.  They’ve easily become the tastiest, and easiest Easter morning breakfast.  They’re essentially buttered marshmallows wrapped in crescent rolls.  As the rolls raise, the marshmallow melts out and leaves the roll hollow and empty.  This is a great way to teach young kids about the Easter story of Jesus being resurrected and his tomb left empty.  The best part is, you only need a handful of ingredients.  See below!”

Ingredients:

  • 1 stick of butter or margarine
  • 1 tube of crescent dough
  • Bag of large marshmallows
  • Cinnamon or cinnamon sugar

Instructions:

  1. Melt butter in one bowl
  2. Mix cinnamon sugar in another bowl
  3. Open the crescent dough and lay them flat on a cookie sheet
  4. Grab a marshmallow, dunk it in melted butter, roll in cinnamon sugar
  5. Place the dunked marshmallow in the middle of the dough and pinch the dough around it
  6. Place about 3 inches apart from each other back on the cookie sheet
  7. Follow baking instructions on dough packaging and bake

Resurrection Rolls Instructions from The House That Lars Built

When you finish our project, display the leaves on your brunch tablescape and enjoy time with your family as you celebrate and remember Palm Sunday.

Palm Sunday craft and Resurrection Rolls from The House That Lars Built

 

A St Patrick’s Day Craft: Paper Shamrock Crown

St. Patrick's Day craft from The House That Lars Built

Here’s a fun fact about shamrocks: There are approximately 10,000 three-leaf clovers for every four-leaf clover, and shamrocks and four-leaf clovers are not the same thing. The word ‘shamrock’ refers only to a clover with three leaves. Our St. Patrick’s Day craft includes both shamrocks and four-leaf clovers so that your crown can display the lushness of the shamrocks mixed in with some luck from the four-leaf clovers.

How to Make Your Own Paper Shamrock Crown

St. Patrick's Day craft from The House That Lars Built

Supplies:

18 gauge wire: 2 14″ pieces

Green paper (3 shades, we used half of 3 12×12 sheets for ours)

Small hole punch

Pink crepe paper: 3 inches x 20 inches

Green-yellow crepe paper: 3 x 7 inches

Scissors

Cricut Machine

Shamrock template

White acrylic paint and paintbrush (optional)

Pink acrylic paint (optional)

Floral tape (6 feet is plenty)

Hot glue gun/glue sticks

11 feet of Floral wire

Wire cutters

St. Patrick's Day craft from The House That Lars Built

Instructions:

  1. Download the svg files for the three-leafed and four-leaved clovers.
  2. With your cricut machine, cut out about 30 clovers. Because we used three kinds of paper, we did 8 three-leafed and 2 four-leafed clovers of each color. (You can also cut your shamrocks out by hand using the same template if needed.)
  3. With a small hole punch, put a little hole in the middle of each clover.
  4. Dilute your white paint with water and use a small paintbrush to add a few little lines to your shamrocks for texture.
  5. Bend your 18-gauge wire into a circle and attach them together with floral tape. We had 14-inch lengths of wire and it took two pieces to make an 8” diameter crown
  6. Assemble your shamrocks by following steps 7-9.
  7.  Cut floral wire into pieces from 2.5-3.5” long. These will be your shamrock stems, and it looks nice for them to be varied in length. Bend the tip of each length of wire down about a third of an inch.
  8. Thread the wire through the hole you punched in your shamrock and gently bend it to secure the leaf top in place. Be careful! It’s pretty easy to tear the leaves in this stage.
  9. Put a dot of hot glue on the bottom of the leaf top to secure it in place
  10. After you assemble all your shamrocks, it’s time to make your blossoms by following steps 11-17. We made 7 blossoms, but repeat these steps until you have your desired number of flowers.
  11. Cut a rectangle about an inch and a half tall and about 2 inches wide from the light yellow crepe paper. Stretch the top so that it flutes and roll it into a tube. Secure with a dot of hot glue. This is your flower center. 
  12. Cut small oval petals (about an inch tall and tapered more at one end) from your pink crepe paper. Each flower has five petals. Glue the extra tapered end to the rolled flower center just below the fluted tip. There should be extra paper at the bottom of the flower center. 
  13. Glue the remaining petals to the attached petal so that they overlap. Put a line of glue along the bottom of the petals and wrap them around the flower center so that they meet up at the first petal. 
  14. Gently stretch the petals so that they curve up a bit. 
  15. Use your pink paint to put thin  lines on the petals leading to the flower center.
  16. Cut a piece of floral wire about 3 inches and poke it through the center of the flower, down the middle of the rolled crepe paper. Put a bit of hot glue on the top of the wire before you finish pulling it into the flower to secure it inside.
  17. With floral tape, wrap the bottom of the flower and down the wire. Flowers are done!
  18. It’s time to attach the shamrocks and flowers to your wire crown form. Wind the bottom of the wire stems around the crown to attach them. At this point, some of the stems might be wobbling loosely and not all staying on one side of the crown. Don’t worry! We’ll address this in a few steps.
  19. Repeat for all your shamrocks and flowers, and distribute the colors, shapes, and stem lengths so that it’s nicely varied.
  20. With your wire cutters, trim any wires that are poking out. Don’t skip this step, or your crown will be painful to wear!
  21. Wrap floral tape around the crown to cover all the coiled wire and pokey bits. It is easiest to do this part with sections of tape about a foot long each rather than juggling all of the tape. 
  22. After that, adjust and arrange the stems of all your shamrocks. Voila! You’re done!

These shamrock crowns are a fun St. Patrick’s Day craft and can be saved and used for years on end. Be sure to be on the lookout for anyone not wearing green. Instead of a pinch, if you feel so kind, you can crown them with some luck to save for next year.

Other St. Patrick’s Day Craft Tutorials

St. Patrick's Day craft from The House That Lars Built

In addition to our most popular St. Patrick’s Day craft tutorials above, you can also check out our Pinterest here for even more ideas!

DIY Doily Honeycomb Decorations

DIY Paper Doily Honeycomb Decorations

You might recall that we made these custom Honeycomb Christmas decorations from templates that we designed, but we wanted it to be a bit easier. Turns out, doilies are great because the shape is created for you and all you have to do is cut them down the middle and assemble. Plus, the doilies create that beautiful lace effect.

The More You Know

I had to do a bit of digging to find out more about what a doily is and why we have them. Turns out, the term doily came from the last name “Doily”, a London firm of linen merchants who made fringed napkins in the 1700’s. Then, from 1711, a doily was a small  ornamental napkin used at dessert. THEN, they were placed on the backs of chairs to protect them from the oil that men used on their hair. Nowadays, some people use them to protect surfaces of tables from decorative objects.

Ok, so now that we know the history of doilies, let’s get to learning how to make these honeycomb decorations. I’m thinking they would be lovely to give as a Valentine or adorn a branch tree (you know we love a decorative tree!) or taking the place of a wreath.

Here’s how to make it!

DIY Honeycomb Valentine ornament

Materials:

  • See above for where to get the doilies
  • Glue gun
  • Scissors or paper cutter

Instructions: 

  1. Measure a line down the middle of the doily to create an axis of symmetry
  2. Cut doilies in half. If your doilies are heart-shaped and have different colors on each side (ours are white on the back) keep the right-sided halves separated from the left-sided ones. You will alternate gluing left and right sides of the heart.
  3. Glue a line down the middle of one half-doily (starting at the axis and moving to the edge.
  4. Place another doily on top. For heart-shaped doilies or ones with different colors on each side, glue the same colors together. The contrasting color/blank side will now be facing up.
  5. Glue two lines down the sides of the doily on the top of the stack.
  6. Place another doily on top, again gluing the same colors together.
  7. Carefully separate the layers where glue may have escaped to lower layers through the holes in the doily.
  8. Repeat steps 4-8 until the stack is tall enough to open up and wrap back around so that the first and last layers meet. This will be about 50 layers or 25 whole doilies.
  9. While pressing down the layers of doilies, glue a line down the spine of the stack and even it out with the warm tip of the glue gun. Make sure that all the layers are adhered together with this glue.
  10. Glue a loop of ribbon to the top of the spine.
  11. Fan open the ornament, carefully separating any layers that may still be stuck together, and glue the first and last layers together. You’re finished!

How to make a circle doily honeycomb decoration

And the tutorial is a bit different if you’re doing a heart. Here’s how to make it:

Would love to see how you put them to use. What will you do with them? Tag us when you make yours with #LarsLovesLove #LarsMakes.

Like these? You’ll also love these:

Honeycomb Ornaments
Lunch sack honeycomb decorations
Printable honeycomb cards

DIY Sparklers For New Year’s Eve

We’ve been busy sharing our favorite DIYs for a fun New Year’s Eve celebration, including paper crowns, 2021 glasses, and more from the Lars archives. Today we’re delving into a really fun project to add to these—some DIY sparklers!

Maybe you’re not a fan of actual fireworks, or the thought of going outside in the chilly night air on New Year’s Eve is not appealing. Either way, this craft is for you. These sparklers require no fire, no lighters, no matches…nothing. Which makes it perfect for the whole family to enjoy, even your youngest kiddos!

DIY Sparklers for New Year's Eve

All you need to make your own DIY sparklers is some colorful cellophane and some wooden dowels. And like many of our projects, this one is reusable.

DIY Sparklers

Materials:

Wooden dowels

Cellophane: We used gold, but also love this iridescent option and this colorful set. You can also use ribbon or tissue paper.

Scissors

Hot Glue Gun

Instructions:

  1. Cut three 12 inch by 5 inch strips of cellophane.

2. Create a fringe effect with each strip by cutting parallel lines down the full strip, making sure never to cut all the way to the edge of your material.

3. Once all 3 strips are fringed, take your dowel and begin gluing one strip on to the top of the dowel.. Starting on one side and twisting it around the skewer, adding a dab of glue when needed to keep it in place.

5. Do that for each strand creating 3 tiered layers at the top of the skewer.

6. Add 1 thin piece of cellophane around the bottom of the 3 tiers to add the finish touch!

This projects also makes for great cake toppers! Or use them for your New Year’s Eve party centerpieces, drink stirrers, tablescape and more.

New Year's Eve Cake Topper

For more creative New Year’s ideas, check out our New Year’s Eve archives.

Printable New Year’s Glasses

This project pairs perfectly with our New Year’s Printable Crown. And just like that last project, this one is printable (though not reusable…unless you invent time travel or take a Sharpie and cross out the 1 at the end, I guess). These glasses are classic for any New Year’s Eve party and they work for even the biggest party-poopers who don’t want to get all glammed up for a photobooth.

Did you know that New Year’s Eve Glasses have been around for 30 years? They were first popular because the numbers of the different years matched up perfectly with holes for the eyes. However, after 2009 ended, so did the era of New Year’s glasses with double zeros in the middle. Not to worry, though! Most places have found a creative workaround.

We have three types of glasses: The folk, The Flower, The Cloud. You can select your favorite and go for it!

The Flower

Just a dash of floral, of course!

The Cloud

Cloud eyes with a rainbow nose bridge!

The Folk

These ones are my favorite! Love how wild they are!

Printable New Year’s Glasses

Materials

Instructions

  1. Print off the templates
  2. Cut around the templates (it’s easier to cut out the inside of the glasses with a craft knife as opposed to scissors
  3. Attach the sides of the glasses with glue or tape

Need some more New Year’s Eve ideas? Check out our archive here.

New Year’s Star Crown
New Year’s Invitations
New Year’s Resolutions

Printable New Year’s Crowns

NYE Party Accessories

We’ve made New Year’s printable crowns in years past, and this year our crown is inspired by our wrapping paper. We’ve done a few in the past (see here and here) and they’re always a crowd favorite, so we thought we’d add to the group and fill it with all the craziness that this year has been–lots of patterns and colors, of course!

Like every other holiday this year, New Year’s Eve is bound to look a little different. But you still deserve to get a little glitzed up, even if you’re lounging in sweats as you watch the ball drop (wait…has that been canceled?).

Of course, the older I get (and the more kids I have), the more New Year’s Eve becomes just another night in, and I don’t usually make it to midnight. Still, I think 2021 needs a nice big welcome from humanity so we don’t get a repeat of this year…

Printable New Year’s Eve Crowns

These crowns are a cinch to put together. You could even leave out the paper and let everyone make their own! Could be part of the night!

Materials

Instructions

  1. There are 8 patterns in the PDF (here). Use two patterns per crown (or print off more to put the same pattern together. We recommend printing onto cardstock! Keeps them sturdy and reuseable! We designed them on 11×17″ paper so they could be big! If you don’t have that size for your home printer, we used our local print shop.
  2. Tape the two pieces from the inside and glue on the outside so you don’t see the seam.
  3. The tab is meant to be adjustable to the size of the head. Cut a slit where the head fits comfortably.
  4. Glue on poms for maximum effect.

We’d love to see your crowns in action. Tag us with #LarsMakes or #HolidaysWithLars so we can see them!

Other NYE Projects

If you liked this project, you’ll love these ones:

Galaxy paper crown tutorial is here (it’s got that vintage look we all love)
Printable NYE crowns
NYE party invitations
DIY Star Crown

Printable Cookie Box with Arlo’s Cookies

These Christmas cookies might (might!) be too pretty to eat! I mean, can you even tell that they’re cookies?! Arlo’s Cookies is the BEST! She has an awesome holiday workshop happening right now. You can also find her Guide to Mixing Colors here. If I wasn’t such an inept baker, I’d be right there with you!

We did a adorable Valentine’s Gift Box collaboration with Arlo’s back in February (doesn’t that seem like years ago?!).

This year we are making a set of cookies inspired by our DIY mid-century nativity. We’re even launching a printable gift box to match the cookies which folds into a house shape. You can safely deliver these to your neighbor’s porches and spread some Christmas cheer!

Printable Christmas Nativity Cookie Box

This cookie box is awaiting to be made. Here’s how to do it!

Materials:

See above (the printable you can find here)

Instructions:

  1. Cut out the template
  2. Cut in between the two pitched lines at the top of the house (see second photo on right. There’s a solid line indicating where that is).
  3. Start scoring all the dotted lines.
  4. Once the lines are scored, fold back all the lines.
  5. Start gluing the tabs to the walls.
  6. You can either glue the tops of the pitched gables in place or secure with a light double sided stick tape so that it can be opened by the receiver.

Optional: Use a hole punch at the top for the tabs and secure with a ribbon!

Head on over to our Shop to see more cute printables and templates!

If you liked this project, you might like the following

Make your own Holiday Nesting Dolls
DIY Bottlebrush Christmas Trees
Printable Santa Lucia crown

This project was done in collaboration with Arlo’s Cookies,